Glossaire
Disclaimer
Les informations contenues dans le présent document ne sont fournies qu'à titre indicatif par Arpa Industriale S.p.a. Arpa ne peut garantir l'exactitude ni la complétude desdites informations. L'utilisateur ne peut tirer aucun droit des informations fournies ; l'utilisation de ces informations se fait sous la responsabilité et aux risques de l'utilisateur.
Ce document ne contient aucune garantie relative aux caractéristiques des produits Arpa.
Balancer
The sheet of laminate or other material used on the back of the compound panel to balance the mechanical tensions on the decorative laminate.
BCS
Laminate typology according to EN 438.
B: colored core. C: Compact (≥ 2 mm).
S: standard.
Balancing
During the production of the compound panels is the machining phase that prevents the compound sheets to warp.
It consists in gluing the right sheet of laminate on the back of the compound panel to balance the mechanical tensions and the dimensional changes of the decorative laminate on the front.
Balancing sheet
See Balancer
Blackboard
Arpa HPL typology whose surface has been treated for being written on with markers, chalks or felt pens. Thickness ranges from 0.9 mm to 3.0 mm.
Bonding
During the production of the compound panels is the machining phase where the laminate sheet is glued to a substrate, usually a wood-based one.
BTS
Laminate typology according to EN 438.
B: colored core. T: Thin (Thickness < 2 mm).
S: standard.
Bubbling
Gluing defect due, for instance, to a non uniform distribution of the glue between the laminate and the substrate or to a substrate with defective surface.